VKA DATA INTEGRATION EXPANDS LINKA TUNGSTEN TO 1.6KM STRIKE
Released
Released
Announcement PDF
contact@vikingmines.com
ASX ANNOUNCEMENT
17 February 2026
1
15-17 Old Aberdeen Place
West Perth, WA, 6005
P +61 8 6245 0870
F +61 8 9322 5230
ASX:VKA
vikingmines.com
VIKING DATA INTEGRATION REVEALS 1.6KM STRIKE AND
MAJOR SCALE POTENTIAL AT LINKA TUNGSTEN PROJECT
• High-grade surface sample confirmed 800m southwest of Linka mine, with historical
grab sample returning 0.6% WO3.
• Exploration footprint expanded significantly as target geology re-emerges from
beneath the Bates Mountain Tuff volcanic cover.
• Mineralised corridor target strike length doubled to ~1.6km based on newly integrated
historical surface sampling and geological mapping.
• Multiple high-grade surface grab and channel samples revealed at the Linka (Main) Pit
with an exceptional 1.0% WO3 over 8.5m and individual grab samples up to 1.5% WO3.
• Substantial regional scale opportunity identified with the 1.6km mineralised corridor
representing only ~29% of the ~5.5km interpreted contacts of the regional intrusive.
• Systematic data integration continues following the acquisition of 68 historical
drillholes and assay records, with additional results pending final validation.
Viking Mines Ltd (ASX: VKA) (“Viking” or “the Company”) is pleased to announce that the
ongoing integration of a strategic historical dataset, acquired in January 2026i
for the Linka
Project in Nevada, USA, has identified a significant expansion of the mineralised target corridor.
Technical evaluation of historical surface mapping and sampling has yielded results which double
the known strike length to 1.6km of tungsten-bearing occurrences at surface, with ~800m
of this corridor untested below the younger Bates Mountain Tuff. These newly identified results
also support a broader larger conceptual exploration target around the full ~5.5km
circumference of the interpreted buried intrusion with potential for tungsten bearing skarn/tactite
mineralisation occurring at its contacts.
Viking Mines MD & CEO Julian Woodcock said:
"Confirming a high-grade surface result nearly a kilometre from the main mine suggests the system
has the potential to be of a much greater magnitude than previously understood. This doubles the
immediate strike potential of the mineralised corridor to 1.6km, which may represent only ~29%
of the ~5.5km interpreted contacts of the regional intrusive.
“Our team is working diligently to capture the full value of this extensive data, and we will share
more insights as they are finalised to refine our targeting as we prepare to move towards drilling."
ONGOING DATA INTEGRATION UNLOCKING SUBSURFACE SCALE
The Company is currently managing an extensive digitisation project following the strategic
purchase of a comprehensive technical dataset.i
This acquisition provides a major technical
advantage, as replicating this volume of field work, including geological mapping, trenching, and
nearly 3,000m of drilling, is estimated to have required up to 12 months of active field seasons
and >$1M expenditure to complete from scratch. Systematic integration is required due to the
significant volume of information, including high-quality scans of cross-sections and maps.
ASX:VKA | vikingmines.com 2
Figure 1; Map showing the digitised geological information and location of surface samples collected as part of a 1975
sampling campaign. Sample A065181 in the SW confirms the presence of tungsten mineralisation 800m SW of the
underground workings at Linka (Main).
ASX:VKA | vikingmines.com 3
This phased approach ensures all data is accurately georeferenced using current high-resolution
airborne survey data, with further tranches of information to be released as the review progresses.
Processing this information into a modern 3D digital environment is significantly improving the
Company’s ability to target mineralisation precisely. Identifying the exact location of historical
high-grade zones and geological controls allows Viking to design more effective exploration
programmes, directly increasing the potential for discovery success in future drilling.
STRATEGIC MAPPING REVEALS 1.6KM STRIKE POTENTIAL
Evaluation of historical surface mapping has already fundamentally changed the interpreted scale
of the Linka Project. Historical records from approximately 800m southwest of the Linka (Main) Pit
identified a shallow, unnamed shaft and surface pits containing tactite (skarn) mineralisation. A
historical sample from this distal location returned 0.6% WO3, confirming that the tungsten-
bearing system persists far beyond the limits of historical mining (Figure 1).
This discovery is of major technical significance as it occurs where the target geology re-appears
at the surface after being obscured for nearly a kilometre by the younger Bates Mountain Tuff.
The presence of mineralisation at this location effectively doubles the total strike potential from
the outcropping corridor to approximately 1.6 km. Furthermore, the current exploration model
suggests that the outcropping position could represent approximately 29% of a potential 5.5km
prospective contact horizon surrounding an interpreted central intrusion.
LINKA PIT HIGH GRADE SAMPLES
Historical sampling in the Linka (Main) Pit returned individual samples up to 1.5% WO3 and an
8.5m channel sample at 1.0% WO3 (Figure 3). The tenor of the sample results reflects the grades
seen in Vikings due diligence metallurgical sample collected from the Linka (Main) Pit which
returned 1.3% WO3.ii
Surface mineralisation is also present to the east and southwest, indicating
the potential for shallow mineralisation requiring definition as a future shallow open pit target.
Figure 2; Photo showing Linka (Main) Pit and location of historic samples. Note the Linka Pit has been partially backfilled so sample
locations are approximate and under cover.
ASX:VKA | vikingmines.com 4
Figure 3; Map of the Linka (Main) Pit and high grade surface sample results up to 1.5% WO3 and 8.5m channel sample at
1.0% WO3. Note the outline of the underground workings 150ft below surface.
ASX:VKA | vikingmines.com 5
ONGOING WORK & NEXT STEPS
The Company continues to evaluate the historical drill hole results and is developing a drill
programme which will systematically test the major potential across the Linka Project.
• Data Release: Drillhole information for Linka (Main), Hillside and Conquest is expected
before the end of February as digitisation and evaluation of the historical drilling data
nears completion.
• Geophysics data acquisition: Complete the gravity and magnetic surveys at Linka which
commenced early February.
• Metallurgical Reporting: Release initial results and update from ongoing metallurgical
testwork on the 1.3% (WO3) Linka sample, expected late February.
• Drill Target Refinement: Use the multi-layered dataset to finalise precise coordinates
for validation and expansion drilling across the high-grade zones.
• Federal Permitting: Finalise and submit the Notice of Intent (NOI) to Federal Agencies
to secure approvals for the planned drilling campaign.
• Portfolio Prioritisation: Continue technical evaluation of the five additional Nevada
tungsten projects to prioritise regional exploration phases.
END
This announcement has been authorised for release by the Board of the Company.
Julian Woodcock
Managing Director and CEO
Viking Mines Limited
For further information, please contact:
Viking Mines Limited
Michaela Stanton-Cook - Company Secretary
+61 8 6245 0870
Forward-Looking Statements
This document may include forward-looking statements. Forward-looking statements include, but are not limited to, statements
concerning Viking Mines Limited’s planned exploration programme and other statements that are not historical facts. When used in
this document, the words such as "could," "plan," "estimate," "expect," "intend," "may”, "potential," "should," and similar expressions
are forward-looking statements. Although Viking Mines Limited believes that its expectations reflected in these forward-looking
statements are reasonable, such statements involve risks and uncertainties and no assurance can be given that actual results will be
consistent with these forward-looking statements.
Competent Persons Statement – Exploration Results
Information in this release that relates to Exploration Results is based on information compiled by Mr Julian Woodcock, who is a
Member of the Australian Institute of Mining and Metallurgy (MAusIMM(CP) – 305446). Mr Woodcock is a full-time employee of Viking
Mines Ltd. Mr Woodcock has sufficient experience which is relevant to the style of mineralisation and type of deposit under
consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian
Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr Woodcock consents to the disclosure of the
information in this report in the form and context in which it appears.
ASX:VKA | vikingmines.com 6
APPENDIX 1: SURFACE SAMPLE COORDINATES AND ASSAY TABLES
Note: Where sample type is recorded as SURF, the sample if a grab sample from the location specified and
no azi or dip is recorded. For sample type CHANNEL, the azi and dip has been assumed based of records
indicating horizontal or vertical. Actual azimuth is not known from the historical records.
A065172 SURF 514081 4353248 1793 n/a n/a n/a
A065171 SURF 514080 4353249 1793 n/a n/a n/a
A065145 CHANNEL 514080 4353251 1793 8.5 000 0
A065170 SURF 514079 4353250 1793 n/a n/a n/a
A065155 CHANNEL 514257 4353532 1792 1.8 000 -90
A065169 SURF 514078 4353251 1792 n/a n/a n/a
A065144 CHANNEL 514050 4353224 1793 2.4 000 0
A065173 CHANNEL 514154 4353252 1798 1.2 000 0
A065181 SURF 513489 4352672 1776 n/a n/a n/a
A065175 SURF 514195 4353336 1796 n/a n/a n/a
A065154 CHANNEL 514215 4353346 1795 1.5 000 0
A065174 CHANNEL 514184 4353319 1797 0.9 000 0
A065179 SURF 514282 4353561 1796 n/a n/a n/a
A065153 CHANNEL 514458 4353740 1773 1.8 000 0
A065135 SURF 514068 4353240 1791 n/a n/a n/a
A065167 CHANNEL 514077 4353253 1790 1.5 000 0
A065176 SURF 514256 4353407 1796 n/a n/a n/a
A065168 SURF 514077 4353252 1791 n/a n/a n/a
A065156 SURF 514263 4353522 1796 n/a n/a n/a
A065136 SURF 514094 4353232 1795 n/a n/a n/a
A065158 CHANNEL 514475 4353627 1791 0.6 000 0
A065180 CHANNEL 514296 4353597 1795 3.0 000 0
A065143 CHANNEL 514041 4353169 1800 3.7 000 0
A065157 CHANNEL 514288 4353587 1796 3.0 000 0
A065159 SURF 514473 4353755 1773 n/a n/a n/a
A065177 CHANNEL 514298 4353522 1806 2.1 000 0
A065178 CHANNEL 514270 4353540 1796 2.4 000 0
A065137 SURF 513453 4352660 1772 n/a n/a n/a
Dip (°)
Sample
Type
East (m)
NAD83
Zone 11N
North (m)
NAD83 Zone
11N
RL
End of
Hole (m)
Azi (°)
Sample/
Channel ID
ASX:VKA | vikingmines.com 7
Note: Where depth from and to are not available, the sample collected is a surface grab sample and has
been collected from the coordinate location.
8
ASX:VKA | vikingmines.com
APPENDIX 2 – JORC CODE, 2012 EDITION – TABLE 1
JORC Table 1, Section 1 – Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut channels, random
chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as downhole gamma sondes, or
handheld XRF instruments, etc.). These examples should
not be taken as limiting the broad meaning of sampling.
1970’s Exploration Surface Sampling
Several sample types/methods were collected from the respective project from either surface sampling (chips &
random chips collected using rock hammers). Both grab samples from individual locations and across larger areas to
produce a sample composite, as well as channel samples are recorded in the historical data. Descriptions are provided
in appendix 1.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
1970’s Exploration Surface Sampling
Drill core and percussion samples are deemed to be representative of the mineralisation and rock units due to the
method of collection. The historical reports indicate the use of UV lamping ensuring mineralised material was sampled
accordingly. No specific details of any other methods used to ensure representivity has been identified in the historic
reports.
Aspects of the determination of mineralisation that are
Material to the Public Report. In cases where ‘industry
standard’ work has been done this would be relatively
simple (e.g. ‘reverse circulation drilling was used to obtain
1 m samples from which 3 kg was pulverised to produce a
30 g charge for fire assay’). In other cases more
explanation may be required, such as where there is
coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (e.g. submarine
nodules) may warrant disclosure of detailed information
1970’s Exploration Surface Sampling
Surface sampling occurred in November and December 1975. Three geologists from Union Carbide worked in the
area and collected 28 surface samples which were assayed for WO3 (Tungsten Trioxide) and sometime other elements
including Molybdenum, Copper, Zinc, Gold and Silver. Molybdenum has been reported in Appendix 1 as levels may
be of significance. No material results have been identified for the remaining other elements and are not reported.
Sample size collected and analytical preparation and analysis method are not known. The samples were analysed at
the Union Assay Office Inc (Salt Lake City, Utah) and Skyline Labs Inc (Wheat Ridge, Colorado).
Drilling
techniques
Drill type (e.g. core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic, etc.) and
details (e.g. core diameter, triple or standard tube, depth
of diamond tails, face-sampling bit or other type, whether
core is oriented and if so, by what method, etc.).
1970’s Exploration Surface Sampling
Not applicable, no drilling being reported.
Drill sample
recovery
Method of recording and assessing core and chip sample
recoveries and results assessed.
1970’s Exploration Surface Sampling
Not applicable, no drilling being reported.
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
1970’s Exploration Surface Sampling
Not applicable, no drilling being reported.
Whether a relationship exists between sample recovery
and grade and whether sample bias may have occurred
due to preferential loss/gain of fine/coarse material.
1970’s Exploration Surface Sampling
Not applicable, no drilling being reported.
9
ASX:VKA | vikingmines.com
Criteria JORC Code explanation Commentary
Logging
Whether core and chip samples have been geologically
and geotechnically logged to a level of detail to support
appropriate Mineral Resource estimation, mining studies
and metallurgical studies.
1970’s Exploration Surface Sampling
Surface samples have a basic geological description of what was sampled on the sample tickets. This is provided in
appendix 1.
Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc.) photography.
1970’s Exploration Surface Sampling
Logging has been assumed as qualitative, however there are no descriptions in the historical reports of the logging
method or what information was collected. No photographs of the historical surface samples.
The total length and percentage of the relevant
intersections logged.
1970’s Exploration Surface Sampling
All surface samples have a basic geological description of what was sampled (appendix 1).
Subsampling
techniques
and sample
preparation
If core, whether cut or sawn and whether quarter, half or
all core taken.
1970’s Exploration Surface Sampling
Not applicable, no drilling being reported.
If non-core, whether riffled, tube sampled, rotary split, etc.
and whether sampled wet or dry.
1970’s Exploration Surface Sampling
Not applicable, no drilling being reported.
For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
1970’s Exploration Surface Sampling
The sample preparation techniques is not described in the historical reports.
Quality control procedures adopted for all subsampling
stages to maximise representivity of samples.
1970’s Exploration Surface Sampling
No specific QAQC samples have been described in the historical reports.
Measures taken to ensure that the sampling is
representative of the in-situ material collected, including
for instance results for field duplicate/second-half
sampling.
1970’s Exploration Surface Sampling
No specific field duplicates or second half sampling is described in the historical reports.
Whether sample sizes are appropriate to the grain size of
the material being sampled.
1970’s Exploration Surface Sampling
The sample size is not reported in the historical reports and the grain size of the mineralisation has not been
determined, however during Vikings due diligence field visit, the visual nature seen under UV light indicates a range
from coarse to fine. The Competent Person considers the historical sample size is appropriate for this style of
mineralisation due to the grade of mineralisation being reported.
Quality of
assay data
and
laboratory
tests
The nature, quality and appropriateness of the assaying
and laboratory procedures used and whether the
technique is considered partial or total.
1970’s Exploration Surface Sampling
The historical reports do not describe the analytical method used by the laboratories.
For geophysical tools, spectrometers, handheld XRF
instruments, etc., the parameters used in determining the
analysis including instrument make and model, reading
times, calibrations factors applied and their derivation, etc.
1970’s Exploration Surface Sampling
No data has been reported of this type.
Nature of quality control procedures adopted (e.g.
standards, blanks, duplicates, external laboratory checks)
and whether acceptable levels of accuracy (i.e. lack of
bias) and precision have been established.
1970’s Exploration Surface Sampling
No QAQC results are described in the historical reports, therefore it is unknown if acceptable levels of accuracy and
precision have been established.
The verification of significant intersections by either
independent or alternative company personnel.
1970’s Exploration Surface Sampling
10
ASX:VKA | vikingmines.com
Criteria JORC Code explanation Commentary
Verification of
sampling and
assaying
Significant intersections have not been verified by either independent or alternative company personnel. However
Vikings surface sampling in the vicinity of the Linka Open pit delivered results within the ranges of that seen in the
historical sampling providing support to the grades reported.
The use of twinned holes.
1970’s Exploration Surface Sampling
Not applicable, no drilling being reported.
Documentation of primary data, data entry procedures,
data verification, data storage (physical and electronic)
protocols.
1970’s Exploration Surface Sampling
The historical reports do not detail documentation of primary data. Due to the data vintage, all data has been
recorded on paper ticket books, printed assay laboratory reports and hand drawn maps with sample locations (and
subsequently scanned). The scanned copies of maps and historical reports have been used to re-create the digital
database. All maps have been georeferenced using historical survey points and known features (shafts etc). The
georeferenced maps are then used in QGIS software to digitise the sample locations with inspection of high resolution
drone photo to align with identifiable surface features (trenches, outcrops etc). All digitised data is stored in Vikings
Maxwell database and excel spreadsheets and imported in to Micromine software for 3D evaluation.
Discuss any adjustment to assay data.
1970’s Exploration Surface Sampling
No adjustments have been made to the assay data.
Location of
data points
Accuracy and quality of surveys used to locate drillholes
(collar and downhole surveys), trenches, mine workings
and other locations used in Mineral Resource estimation.
1970’s Exploration Surface Sampling
All surface samples are reported with easting and northing locations which have been obtained via digitising their
location from georeferenced maps and amended using high resolution drone imagery and sample location
descriptions in the ticket books. The maps were georeferenced using known surface features and 5 surface survey
control points which were physically identified in the field and surveyed using a DGPS instrument. Elevation values
have been determined by sampling the USGS 1m resolution LiDAR Digital Elevation Model. Individual collar locations
were then assessed against a high resolution 2cm pixel resolution drone orthomosaic image collected by Viking in
December 2025. For all surface sample locations there remains a high level of certainty to the accurate locations and
will not be used in any future mineral resource estimation. The precision of the surface sample locations is high.
Specification of the grid system used.
Viking has digitised all sample locations in to the adopted grid system of NAD83/UTM Zone 11N and all data are
reported in these coordinates.
Quality and adequacy of topographic control.
Publicly available LiDAR data from the USGS is at 1m accuracy and considered of a high quality and has been used to
determine the elevation of the samples collected. Spatial location of historical maps has been achieved via surveying
historical survey control points to cm accuracy providing a high level of survey control
Data spacing
and
distribution
Data spacing for reporting of Exploration Results.
1970’s Exploration Surface Sampling
Data spacing of the surface sample locations is highly variable which is to be expected for this sample type.
Whether the data spacing and distribution is sufficient to
establish the degree of geological and grade continuity
appropriate for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications applied.
1970’s Exploration Surface Sampling
No mineral resource is being reported and therefore resource classification is not being used and as such not
applicable.
Whether sample compositing has been applied.
1970’s Exploration Surface Sampling
Samples have been composited in the field to deliver a single sample to the laboratory for analysis. No results have
been composited. All assay results for each sample are reported in appendix 1.
Orientation of
data in
relation to
Whether the orientation of sampling achieves unbiased
sampling of possible structures and the extent to which
this is known, considering the deposit type.
1970’s Exploration Surface Sampling
It is not known if samples were collected in a manner to introduce a sample bias. Where described in the ticket books,
channel samples were collected in variable orientations, sometimes across strike, but not consistently depending on
the exposure observed in the field.
11
ASX:VKA | vikingmines.com
Criteria JORC Code explanation Commentary
geological
structure
If the relationship between the drilling orientation and the
orientation of key mineralised structures is considered to
have introduced a sampling bias, this should be assessed
and reported if material.
1970’s Exploration Surface Sampling
It has not been established if a sampling bias has been introduced due to the variable nature of both the orientation
and morphology of the mineralisation. Mineralisation has not been determined to be structurally controlled which is
expected for the style of mineralisation (contact metamorphism between intrusive and sedimentary rocks) and the
orientation is expected to be highly variable due to the irregular nature of the intrusive body.
Sample
security
The measures taken to ensure sample security.
1970’s Exploration Surface Sampling
No details are provided in the historical reports on measures taken to ensure sample security.
Audits or
reviews
The results of any audits or reviews of sampling
techniques and data.
1970’s Exploration Surface Sampling
The Company has conducted no audits or reviews of the sampling techniques and data.
JORC 2012 Table 1, Section 2 – Reporting of Exploration Results
Criteria JORC Code explanation Commentary
Mineral tenement
and land tenure
status
Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint
ventures, partnerships, overriding royalties,
native title interests, historical sites,
wilderness or national park and
environmental settings.
Tenements and location
The USA Tungsten Project Lode Mineral Claims are located in the state of Nevada in the USA. Details of the Mineral Claims
are presented in the table below:
Project State County Type Holder Quantity
Linka Nevada Lander Unpatented
BLK Group LLC 10
Viking Tungsten LLC 91
Alpine Nevada Pershing Unpatented BLK Group LLC 4
Long Nevada Pershing Unpatented
BLK Group LLC 4
Viking Tungsten LLC 12
Ragged Top Nevada Pershing Unpatented
BLK Group LLC 8
Viking Tungsten LLC 30
Terrell Nevada Nye Unpatented
BLK Group LLC 10
Viking Tungsten LLC 56
Victory Nevada Nye Unpatented Kircher Mine Development LLC 8
Third Party Interests
Viking Mines Ltd has signed a binding term sheet to acquire a 100% interest in the project BLK Group LLC Mineral Claims
and currently holds no ownership. Viking can acquire 100% interest in the claims by paying a total of US$2.88M over a
staged 7 year period. BLK group will retain a 2% NSR on all minerals recovered from mineral claims, and Viking retains the
option to buy down 1% of the NSR for US$2M.
Native Title, Historical sites and Wilderness
There are no known registered historical sites over the Project Mineral Claims. The Mineral Claims are registered with the
Bureau of Land Management. The Linka Project has split federal agency responsibility with the Bureau of Land management
managing all claims located due west of the Linka Shaft and the US Forestry Service due east. All the remaining projects fall
under the jurisdiction of the BLM.
12
ASX:VKA | vikingmines.com
Criteria JORC Code explanation Commentary
The security of the tenure held at the time of
reporting along with any known
impediments to obtaining a licence to
operate in the area.
The tenements are held in good standing by BLK Group LLC. To the best of Vikings knowledge, all annual claim payments
are up to date. There are no known impediments to obtaining a licence to operate in the area. The US process is to file
either a notice of intent or Plan of Operations to the responsible Federal Agency to obtain permits for drilling. The
Company does not know of any reason why these permits would not be granted once the process if followed and the
required bond payment made.
Exploration done
by other parties
Acknowledgment and appraisal of
exploration by other parties.
Linka Mine: The area was staked in 1941 by Steve Linka of Austin, NV. In 1943-44, the mine produced 2,420 tons of ore
averaging 0.69% WOз. Consolidated Uranium Mines purchased the property in 1953, sunk a vertical shaft to 210 feet and
drove approximately 1,000 feet of drifts and cross-cuts on the 150’ level. Additional production included; 4,000 tons of ore
averaging 0.98% WOз between 1951 and 1956 and 60,000 tons averaging 0.40% WOз between 1955 and 1956. The mine
closed when the Government buying program ended. Mine workings include a 100’ X 50’ open-pit 25 feet deep, a 210’
shaft with approximately 1,500 feet of drifts and cross-cuts. Shrinkage stopes extend from the 150’ level to the surface
(Stager and Tingley, 1988).
In 1951, the Linka Mine was optioned to Hugh Chesser, Reno, NV. Hugh Chesser estimates shipments to Metals Reserve
Corporation during WWII totalled 2,673 tons averaging 0.72 percent WOз.
Cache Creek Exploration held the properties in the early 1970’s and conducted geological and geophysical programs.
Duval Corporation optioned the properties in the mid-1970’s, did geological studies but no drilling. Min-Ex drilled the
property in 1977-78, with a total of 73 drillholes recorded (eight DDH and 64 wide-spread percussion drillholes). Note: Not
all drillhole locations have been established, with 69 holes digitised and 1 hole estimated (total 70) and three percussion
holes with unknown location. Exploration activity completed by Minex included drilling, surface and underground
geological mapping and sampling, minor geophysical magnetic survey with 10,400 linear feet collected (inconclusive
results), 6,500ft of bulldozer trenching and mapping.
Stager and Tingley, 1988 estimate total production at the Linka mine at 25,670 units WOз (1943-56).
Linka-Conquest Mine: The mine was discovered in 1941 but did not start production until 1943 when Gale Peer sunk a
two-compartment inclined shaft to 130 feet. Workings off the shaft were at the 50 and 100 foot levels. During WW II mined
and shipped 390 tons of ore averaging 2.7% WOз. Additional shipments after the War averaged over 1.0% WOз, but the
tonnage is unknown. Last work on the 100’ level exposed a zone 40’ long, 12’ to 20’ wide, open to the northeast with a
grade of <0.4% WOз. Stager and Tingley, 1988, estimate total production at 5,208 units WOз (1944-56).
Stager and Tingley, 1988 estimate total production at the Conquest mine to be 5,208 units WOз (1944-56)
Alpine Mine: In 1943, an access road was built to the Alpine property with Government assistance. The Mine was operated
by the Rare Metals Corporation, in 1943-46. The ore was shipped to the Toulan Mill.
Production amounted to 47,000 tons from which 564,000 pounds of concentrate was produced averaging 70 percent WOз
(C.P. Seel, 1977, General Electric Company).
Mine workings consist of an open-pit about 120 feet long, 70 feet wide and 70 feet deep. There are about 1000 feet of
workings below the pit consisting of an adit with raises into the pit, and a winze 50 feet deep with drifts from the bottom
(Stager & Tingley, 1988). Ore shoots are 3 to 10 feet wide.
The two most important min
Share your feedback
Discover