VISIBLE SCHEELITE LOGGED IN 11 FURTHER HOLES AT LINKA
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
19 November 2026
ASX:VKA
OTC:VKALF
vikingmines.com
15-17 Old Aberdeen Place
West Perth, WA, 6005
P +61 8 6245 0870
F +61 8 9322 5230
contact@vikingmines.com
1
SIGNIFICANT VISIBLE SCHEELITE LOGGED IN 11 FURTHER
HOLES AT LINKA
• Logging of the final 15 RC holes at Linka Main is complete, with visible scheelite
identified in 11 holes. Significant visual intercepts include:
• LKRC0024: 18.3m of visible scheelite from 12.2m downhole.
• LKRC0025: Combined 15.3m of visible scheelite over a 28.2m horizon from
53.3m downhole (Figure 2).
• LKRC0023: 11.4m of visible scheelite (Figure 1) from 11.4m downhole (including
0.8m void with no sample return).
• Visible scheelite has now been logged in 25 of the 31 holes drilled at Linka Main in the
maiden drilling programme (excludes 17 holes at SW Extension and Regional targets).
• Scheelite hosted in tactite (skarn) identified by Company geologists in RC drill chips by
its distinctive fluorescence under shortwave (254nm) ultraviolet (UV) light (Figure 1).
• Estimated visual abundance across the reported intercepts ranges from 0.05% to 1.2%
scheelite (not an assay WO3 grade).
• Assays received to date for 14 holes at Linka Main align spatially with scheelite zones
logged under UV light, including 18m at 0.47% WO3 (LKRC0005), 9.9m at 0.51% WO3
(LKRC0016) and 12.2m at 0.20% WO3 (LKRC0017)i
.
• Assays for LKRC0021 and LKRC0022 expected in late November to early December,
with the remaining holes expected through December 2026i
.
• Maiden programme complete: 48 RC holes for approximately 3,491mi
.
Cautionary note: Visual estimates of mineral abundance should never be considered a proxy or
substitute for laboratory analyses where concentrations or grades are the factor of principal
economic interest. Visual estimates also potentially provide no information regarding impurities or
deleterious physical properties relevant to valuations.
Viking Mines Limited (ASX: VKA, OTCID: VKALF) ("Viking" or "the Company") is pleased to
report visual logging results for the final 15 reverse circulation ("RC") holes drilled at Linka Main,
part of the Linka Tungsten Project in Nevada, USA. Visible scheelite was identified under
shortwave (254nm) UV light in 11 of the 15 holes.
Viking Mines Managing Director & CEO Julian Woodcock said:
“Logging is now complete for all holes completed at Linka Main, and we have logged scheelite in
the majority of holes drilled. This consistency matters as Linka was mined in the 1950s, and this
programme has shown mineralisation continuing both above and below the old workings.
“The holes assayed so far have returned tungsten where our geologists logged scheelite under UV
light. Visual logging does not tell us grade but does give us an early indication of thickness and
scheelite intensity. With all samples now at the laboratory, we expect assays through December.”
2
ASX:VKA | OTC:VKALF | vikingmines.com
LINKA VISUAL INTERCEPTS
Visible scheelite has now been identified in 25 of the 31 holes drilled at Linka Main.
Logging observations for 16 drillholes have previously been reported, including intercepts in 14
drillholesii
with visible scheelite estimates. This announcement reports logging observations for
the remaining 15 Linka Main drillholes (excludes holes drilled at the SW Extension and regional
targets), with intercepts containing visual scheelite evident in 11 further drillholes (Figure 3).
Scheelite (CaWO4) occurs as disseminated mineralisation and thin veinlets hosted in tactite
(skarn), the same style of mineralisation intersected in the drillholes assayed to datei
. Company
geologists identify scheelite visually by its distinct fluorescence under shortwave (254nm) UV
light.
Cautionary note: Visual estimates of mineral abundance should never be considered a proxy or substitute for laboratory
analyses where concentrations or grades are the factor of principal economic interest. Visual estimates also potentially
provide no information regarding impurities or deleterious physical properties relevant to valuations.
Figure 1; RC chip trays from LKRC0023 photographed under natural light (top) and shortwave UV (254nm) light (bottom) showing an
11.4m interval (including 0.8m of no sample return from 16.8m) of visible scheelite from 11.4m downhole. Intervals are downhole
lengths; true widths are not yet known. Visual estimates are not assay grades.
3
ASX:VKA | OTC:VKALF | vikingmines.com
Figure 2; RC chip trays from LKRC0025 photographed under natural light (top) and shortwave UV (254nm) light (bottom), showing
three zones of visible scheelite totalling 15.3m over a 28.2m downhole horizon from 53.3m. The intervals comprise 4.6m from 53.3m,
0.8m from 66.3m and 9.9m from 71.6m. Intervals are downhole lengths; true widths are not yet known. Visual estimates are not assay
grades.
4
ASX:VKA | OTC:VKALF | vikingmines.com
Linka Main Drillholes With Visible Scheelite
A geological summary of the remaining 15 holes with estimates of visual abundance of scheelite
is provided below.
Cautionary note: Visual estimates of mineral abundance should never be considered a proxy or
substitute for laboratory analyses where concentrations or grades are the factor of principal
economic interest. Visual estimates also potentially provide no information regarding impurities or
deleterious physical properties relevant to valuations.
• LKRC0023: 11.4m interval (including 0.8m void from 16.8m) with visible scheelite from
11.4m downhole (37.5ft to 75ft). Estimated visual abundance from 0.1% to 0.5% scheelite
(Figure 1). Several sampled intervals exhibited strong fluorescence, with scheelite identified
at shallow depths.
• LKRC0024: 18.3m continuous interval with visible scheelite from 12.2m downhole to end of
hole (40ft to 100ft). Estimated visual abundance from 0.1% to 0.3% scheelite. The hole ended
due to breaking through into a historic stope.
• LKRC0025: Combined total of 15.3m of visible scheelite (in three zones) over a 28.2m
horizon from 53.3m downhole (4.6m from 53.3m, 0.8m from 66.3m and 9.9m from 71.6m).
Estimated visual abundance ranges from 0.1% to 0.3% scheelite (Figure 2). This represents
the first hole where scheelite-hosting skarn has been identified occurring as multiple lenses
associated with thin granitic dykes – interpreted as apophyses extending from the main
plutonic body and suggesting potential for the discovery of additional mineralised lodes
associated with subsidiary intrusive offshoots.
• LKRC0035: Three intervals with visible scheelite: 1.5m from 41.1m downhole (from 0.3% to
0.5%) and 1.5m from 51.8m downhole (from 0.1% to 0.2%) on the upper and lower contacts
of a monzonite apophysis, and 1.5m from 114.3m downhole (375ft to 380ft) with a very
strong UV response (from 0.8% to 1.2% scheelite). The deeper interval is of significance
as it lies east of a NNW-SSE striking diorite dyke and east of the historically mined area at
Linka and has one of the strongest visible responses under UV light observed to date.
This identifies a potential new target east of the historically mined area, where further drilling
and assay results will be required to establish the extent and grade of mineralisation.
• LKMB0001: Continuous 7.6m interval from 45.0m downhole (from 0.1% to 0.4% scheelite).
The results further highlight the exploration potential for additional scheelite-bearing zones
analogous to Linka Main. This hole has been converted to a monitoring bore to facilitate
baseline permitting data collection.
• LKRC0030: Estimated visual abundance of scheelite ranges from 0.05% to 0.3% over a
15.2m interval from 88.4m downhole. The visually identified scheelite-bearing interval is
approximately four times the downhole length of the interval predicted by the current
geological model. This observation suggests that the interpreted mineralised system may
extend below the depth of historical drilling in this location, subject to assay confirmation and
further geological interpretation.
5
ASX:VKA | OTC:VKALF | vikingmines.com
• LKRC0027: Combined total of 8.4m of visible scheelite (in two zones) over a 19.0m horizon
from 57.2m downhole (0.8m from 57.2m and 7.6m from 68.6m). Estimated visual abundance
ranges from 0.1% to 0.2% scheelite. Again, the interval at depth was around four times wider
than previously predicted by the geological model. Subject to assay confirmation and further
geological interpretation, the separate shallower lens represents a secondary mineralised
zone which had not previously been identified.
• LKRC0036: Three intervals with visible scheelite ranging from 0.1% to 0.2%: 3.0m from
29.0m, 9.1m from 76.2m and 6.1m from 103.6m. Drilled to test the margin of the diorite dyke
along strike to the NNW, east of the historically mined area and in a new target location.
• LKRC0037: 3.8m continuous interval with visible scheelite from 19.1m downhole (62.5ft to
75ft). Estimated visual abundance from 0.1% to 0.3% scheelite.
• LKRC0043: Two narrow intervals with visible scheelite estimated abundance from 0.1% -
0.2%: 1.5m from 70.1m downhole, a minor lens on the lower contact of a monzonite
apophysis, and 1.5m from 164.6m downhole on the margin of a diorite dyke, interpreted as
a possible down-dip, SSW extension of the deep LKRC0035 intercept and new target area.
• LKRC0029: 1.5m interval with weak visible scheelite from 27.4m downhole. Thin skarn
developed on a monzonitic dyke contact. Estimated visual abundance from 0.05% to 0.1%
scheelite.
Remaining Linka Main Drillholes
The following summarises the four remaining Linka Main holes in which no visible scheelite was
observed.
• LKRC0026: This hole was designed to test the western and eastern margins of a monzonite
dyke which is located on the western side of Linka Main. The western margin was tested with
no skarn evident; however, the hole did not reach target depth due to ground conditions
within the monzonite dyke resulting in the hole being abandoned. As such, the eastern margin
was not successfully tested. The difficult ground conditions encountered at the end of hole
are interpreted to relate to skarn formation along the monzonite contact whereby ore-forming
fluids would generate voids within favourable host rocks, and the depth of abandonment
correlates with the Company’s geological model. However, this hypothesis remains unproven.
• LKRC0028: This was a second hole designed to test the western and eastern margins of the
monzonite dyke on the western side of Linka Main following the abandonment of LKRC0026.
During drilling, the dip of the lower contact of the monzonite dyke has been established as
shallower than expected from geological modelling and, as such, the hole did not successfully
test the eastern margin of the dyke with the target remaining untested.
• LKRC0038: A short hole designed to test the crown pillar left in place over the workings at
the north-eastern extent of Linka Main. A mafic dyke was encountered at the modelled depth
of skarn and as such is interpreted to have replaced the skarn and associated mineralisation.
• LKRC0045: Intended to test the eastern margin of the monzonite dyke which was not tested
by LKRC0026. This hole did successfully reach target depth but, despite the appropriate
alteration, there was no visual scheelite developed in this location.
6
ASX:VKA | OTC:VKALF | vikingmines.com
Figure 3; Map of Linka Main showing surface geology, historical drillholes and newly and previously reported Viking drillholes, with
selected newly identified visible scheelite intercepts highlighted. Reported intervals are downhole lengths; true widths are not yet
known. Visible scheelite observations do not establish tungsten grade.
7
ASX:VKA | OTC:VKALF | vikingmines.com
Assays
Assay results have been received and reported for 14 holes at Linka Main and continue to align
spatially with the scheelite zones logged under shortwave (254nm) UV lighti
. All samples for the
remaining drillholes have been delivered to the laboratory and are pending analysis. Assays for
LKRC0021 and LKRC0022 are expected in late November to early December, with results for the
remaining holes expected through December 2026i
.
SW Extension
A 3m zone containing visible scheelite (estimated visual abundance 0.1%–0.3%; true width not
yet known) in LKRC0044 ~500m south-west of Linka Main was reported on 18 November 2026iii
.
This area is a priority target zone for further work. Upon assay confirmation of contained WO3 in
the visually identified zone, the Company will plan follow-up activity for more comprehensive
testing of the ~800m strike length target horizon. For context, the Linka Main to Conquest sub-
cropping mineralised trend is ~820m in strike length. This priority target area doubles the strike
length and now has returned a 3m long bedrock intercept. The results further highlight the
exploration potential for additional scheelite-bearing zones analogous to Linka Main.
DRILLING PROGRAMME SUMMARY
The maiden RC programme at Linka has been completed, with 48 holes drilled for approximately
3,491m and the rig demobilisedi
. 31 holes were drilled at Linka Main, 10 at the SW Extension and
7 at Regional targets.
NEXT STEPS
The Company’s near-term workstreams for the Linka Tungsten Project include:
• Reporting of results for LKRC0021 and LKRC0022, with assays expected from the laboratory
in late November/early December, and for the remaining holes throughout December 2026
(upon completion of QAQC and interpretation).
• Re-analysis of mineralised intervals using an ore grade method with an XRF finish once all
assays are received.
• Updating the 3D geological model with assay results and establishing estimated true widths.
• Ongoing metallurgical testwork on samples from Conquest, Hillside and the Linka stockpile,
including the second round of ore sorting testwork with TOMRA.
• Identification of toll treatment options for the approved 900t bulk sample.
END
This announcement has been authorised for release by the Board of the Company.
Julian Woodcock
Managing Director and CEO
Viking Mines Limited
For further information, please contact:
Michaela Stanton-Cook - Company Secretary
Viking Mines Limited
+61 8 6245 0870
8
ASX:VKA | OTC:VKALF | vikingmines.com
Learn more about Viking Mines via our investor hub here.
i
ASX announcement 12 November 2026: Viking’s assays continue to confirm high-grade tungsten mineralisation at Linka. LKRC0005 re-assay
supersedes the result reported 24 September 2026.
ii
ASX announcements 19 August 2026: Viking drills wide scheelite zones at Linka Tungsten Project; 17 September 2026: Drilling extends
priority target zones at Linka; and 20 October 2026: Viking intersects wide zones of visible scheelite at Linka.
iii
ASX announcement 18 November 2026: Visible scheelite intersected at SW Extension, 500m from Linka Main.
Competent Persons Statement – Exploration Results
Information in this release that relates to Exploration Results is based on information compiled by Mr Julian Woodcock, who is a
Member of the Australian Institute of Mining and Metallurgy (MAusIMM(CP) – 305446). Mr Woodcock is a full-time employee of
Viking Mines Ltd. Mr Woodcock has sufficient experience which is relevant to the style of mineralisation and type of deposit under
consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the
‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr Woodcock consents to the
disclosure of the information in this report in the form and context in which it appears.
Forward-Looking Statements
This document may include forward-looking statements. Forward-looking statements include, but are not limited to, statements
concerning Viking Mines Limited’s planned exploration programme and other statements that are not historical facts. When used
in this document, the words such as "could," "plan," "estimate," "expect," "intend," "may”, "potential," "should," and similar
expressions are forward-looking statements. Although Viking Mines Limited believes that its expectations reflected in these
forward-looking statements are reasonable, such statements involve risks and uncertainties and no assurance can be given that
actual results will be consistent with these forward-looking statements.
9
ASX:VKA | OTC:VKALF | vikingmines.com
ABOUT THE LINKA TUNGSTEN PROJECT
The Linka Tungsten Project is located in Lander and Pershing counties, Nevada, USA, and
comprises three historically producing tungsten mines: Linka, Conquest and Hillside.
Mineralisation occurs as scheelite-bearing skarn developed in limestone along the contact with
granitic intrusive rocks. The mines produced approximately 65,000 tonnes at 0.5% WO₃ through
a 360 tonne-per-day mill up to 1956, when operations ceased in response to the prevailing
tungsten price rather than for geological reasons. Linka's historical mill grade of approximately
0.5% WO₃ ranks among the highest of comparable global tungsten projects.
In December 2025 Viking signed a binding term sheet to acquire a 100% interest in the Project
and is pursuing a brownfields restart strategy that builds on substantial existing infrastructure,
including a 150ft (~46m) shaft, historic pits and underground workings, an on-site ROM pad and
historical tailings dam, and approximately 8.5km² of consolidated mining claims, with sealed
highway within 7km and grid power within 4km. Digitisation of 72 historical drillholes (2,908m)
has extended the known mineralised trend to 1.6km within an interpreted ~7km regional intrusive
contact that remains largely untested. Surface sampling has returned grades up to 14.7% WO₃,
and recent metallurgical testwork has produced a 56.9% WO₃ concentrate at 76.0% recovery
using conventional gravity and flotation. With tungsten designated a critical mineral and the US
REEShore Act mandating Chinese-free tungsten in US military supply chains from December
2026, the Project is positioned to advance towards a near-term, domestically sourced restart.
10
ASX:VKA | OTC:VKALF | vikingmines.com
APPENDIX 1 – DRILLHOLE INFORMATION
Note: Visual intervals are downhole lengths; true widths are not yet known. Metre values are converted from the
original foot measurements and rounded independently; combined totals are calculated before rounding. A dash
indicates no visible scheelite logged. Visual abundance is scheelite abundance, not an assayed WO3 grade.
; ;
11
ASX:VKA | OTC:VKALF | vikingmines.com
Hole ID
Hole
Type
From (ft) To (ft) From (m) To (m)
Interval
(m)
Est. visual
abundance (%)
LKMB0001 RC 147.5 172.5 45.0 52.6 7.6 0.1 – 0.4
LKRC0023 RC 37.5 75 11.4 22.8 11.4 0.1 – 0.5
LKRC0024 RC 40 100 12.2 30.5 18.3 0.1 – 0.3
LKRC0025 RC 175 190 53.3 57.9 4.6 0.1 – 0.3
LKRC0025 RC 217.5 220 66.3 67.1 0.8 0.1 – 0.2
LKRC0025 RC 235 267.5 71.6 81.5 9.9 0.1 – 0.2
LKRC0026 RC – – – – – -
LKRC0027 RC 187.5 190 57.2 57.9 0.8 0.1 – 0.2
LKRC0027 RC 225 250 68.6 76.2 7.6 0.1 – 0.2
LKRC0028 RC – – – – – -
LKRC0029 RC 90 95 27.4 29.0 1.5 0.05 – 0.1
LKRC0030 RC 290 340 88.4 103.6 15.2 0.05 – 0.3
LKRC0035 RC 135 140 41.1 42.7 1.5 0.3 – 0.5
LKRC0035 RC 170 175 51.8 53.3 1.5 0.1 – 0.2
LKRC0035 RC 375 380 114.3 115.8 1.5 0.8 – 1.2
LKRC0036 RC 95 105 29.0 32.0 3.0 0.1 – 0.2
LKRC0036 RC 250 280 76.2 85.3 9.1 0.1 – 0.2
LKRC0036 RC 340 360 103.6 109.7 6.1 0.1 – 0.2
LKRC0037 RC 62.5 75 19.1 22.9 3.8 0.1 – 0.3
LKRC0038 RC – – – – – -
LKRC0043 RC 230 235 70.1 71.6 1.5 0.1 – 0.2
LKRC0043 RC 540 545 164.6 166.1 1.5 0.1 – 0.2
LKRC0045 RC – – – – – –
12
ASX:VKA, OTC:VKALF | vikingmines.com
APPENDIX 2 – JORC CODE, 2012 EDITION – TABLE 1
JORC Table 1, Section 1 – Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the minerals
under investigation, such as downhole gamma sondes, or handheld XRF
instruments, etc.). These examples should not be taken as limiting the broad
meaning of sampling.
RC chip samples are collected at the drill rig during the drilling process. The full drilling interval is
collected from the sampling system on the drill rig into plastic bags. The sample is sieved to collect a
portion of chips for geological logging. The chips are subsequently lamped using a shortwave UV light
(254nm) to assess visually scheelite content.
Include reference to measures taken to ensure sample representivity and the
appropriate calibration of any measurement tools or systems used.
For each sample interval, RC sample recovery is monitored for excessive sample loss and recorded to
ensure sample representivity. Sample condition (dry/moist/wet) is also recorded to ascertain sample
quality.
Aspects of the determination of mineralisation that are Material to the Public
Report. In cases where ‘industry standard’ work has been done this would be
relatively simple (e.g. ‘reverse circulation drilling was used to obtain 1 m samples
from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such as where there is coarse gold that
has inherent sampling problems. Unusual commodities or mineralisation types
(e.g. submarine nodules) may warrant disclosure of detailed information
RC drilling is used to obtain either 1m, 2.5ft (0.76m) or 5ft (1.52m) sample intervals depending on the
drilling rig being used and tooling available (metric vs imperial length drill rods). For the holes reported
in this announcement, samples were collected on 5ft intervals, reducing to 2.5ft intervals through the
zones of interest. No laboratory assay results have yet been received for the holes referred to in this
report and this report outlines visual estimates from the RC chip samples collected.
Drilling
techniques
Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc.) and details (e.g. core diameter, triple or standard
tube, depth of diamond tails, face-sampling bit or other type, whether core is
oriented and if so, by what method, etc.).
Reverse circulation (RC) drilling using a face-sampling hammer is utilised.
Drill sample
recovery
Method of recording and assessing core and chip sample recoveries and results
assessed.
RC drilling recoveries are visually estimated and recorded as part of geological logging and sampling
process and is estimated as either Good, Fair, Poor or No sample.
Measures taken to maximise sample recovery and ensure representative nature
of the samples.
RC drilling sample recovery is monitored to ensure representivity of the samples. High pressure air
compressors with auxiliary boosters and compressors are used to maximise good sample recovery from
the drillhole. The company monitors recovery using visual estimates and weights of sample recovered.
Whether a relationship exists between sample recovery and grade and whether
sample bias may have occurred due to preferential loss/gain of fine/coarse
material.
Not applicable. No assays reported.
Logging
Whether core and chip samples have been geologically and geotechnically
logged to a level of detail to support appropriate Mineral Resource estimation,
mining studies and metallurgical studies.
RC logging of all drill cuttings is undertaken. No geotechnical logging has been undertaken. Logging of
RC chips is sufficient to support future studies.
Whether logging is qualitative or quantitative in nature. Core (or costean,
channel, etc.) photography.
Geological logging of RC chips is qualitative in nature. Quantitative estimates (visual percentage
estimates) are undertaken for abundance of key minerals (including scheelite). Photographs are taken of
all RC chip trays under natural and shortwave UV (254nm) light to identify fluorescent minerals.
13
ASX:VKA, OTC:VKALF | vikingmines.com
Criteria JORC Code explanation Commentary
The total length and percentage of the relevant intersections logged. 100% of RC drilling is logged.
Subsampling
techniques and
sample
preparation
If core, whether cut or sawn and whether quarter, half or all core taken. Not applicable.
If non-core, whether riffled, tube sampled, rotary split, etc. and whether sampled
wet or dry.
Splitting of dry samples is undertaken using a 3 tier riffle splitter with the full sample from the drilling
interval (2.5ft or 5ft) put through the riffle.
For all sample types, the nature, quality and appropriateness of the sample
preparation technique.
The sample preparation and sub-sampling techniques are appropriate for this material’s mineralogical
makeup.
Quality control procedures adopted for all subsampling stages to maximise
representivity of samples.
Sample mass per metre is recorded and any intervals with low recovery or anomalous mass are
investigated.
Measures taken to ensure that the sampling is representative of the in-situ
material collected, including for instance results for field duplicate/second-half
sampling.
Duplicate samples are taken 1 in every 20 mineralised samples.
Whether sample sizes are appropriate to the grain size of the material being
sampled.
The current methods and processes described are appropriate for this style of mineralisation.
Quality of
assay data and
laboratory
tests
The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or total.
No assay results are being reported.
For geophysical tools, spectrometers, handheld XRF instruments, etc., the
parameters used in determining the analysis including instrument make and
model, reading times, calibrations factors applied and their derivation, etc.
Not applicable.
Nature of quality control procedures adopted (e.g. standards, blanks, duplicates,
external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of
bias) and precision have been established.
No assay results are being reported.
Verification of
sampling and
assaying
The verification of significant intersections by either independent or alternative
company personnel.
Not applicable, no assay results are being reported.
The use of twinned holes. Not applicable, no assay results being reported.
Documentation of primary data, data entry procedures, data verification, data
storage (physical and electronic) protocols.
Primary data for drill cuttings, including sample number, depth, colour, grain size, weathering, lithology,
alteration, rock fabric and the presence of minerals potentially related to mineralisation are collected in
the field and entered into a spreadsheet which is then uploaded into relational (Maxwell Datashed)
database. Data is managed using the company’s SharePoint system and sample information is recorded
into notebooks at the time of sampling.
Discuss any adjustment to assay data. No assay results are being reported.
Location of
data points
Accuracy and quality of surveys used to locate drillholes (collar and downhole
surveys), trenches, mine workings and other locations used in Mineral Resource
estimation.
The collar positions have been initially measured using a handheld GPS with an accuracy of +/-5m (z).
Upon completion of the drilling programme a differential GPS (accuracy +/- 0.5m) will be used to
accurately obtain the collar coordinates. The downhole azimuth and dip are surveyed using an Axis
Mining Technology Champ Gyro tool with an accuracy of +/- 1 degree for the azimuth and +/-0.1
degrees for the dip.
14
ASX:VKA, OTC:VKALF | vikingmines.com
Criteria JORC Code explanation Commentary
No MRE is being reported, but the methods being used are deemed suitable for any future MRE
estimation.
Specification of the grid system used. The adopted grid system is NAD83/UTM Zone 11N and all data are reported in these coordinates.
Quality and adequacy of topographic control.
Publicly available LiDAR data from the USGS is at 1m accuracy and considered of a high quality and has
been used to determine the elevation of the samples collected.
Data spacing
and
distribution
Data spacing for reporting of Exploration Results.
Results are reported for individual drillholes from the Company’s maiden drilling programme at Linka.
See map in the body of the report for data spacing of drillholes. Drill spacing ranges from close (<10m)
to far (>200m).
Whether the data spacing and distribution is sufficient to establish the degree of
geological and grade continuity appropriate for the Mineral Resource and Ore
Reserve estimation procedure(s) and classifications applied.
Not applicable, no mineral resource being reported.
Whether sample compositing has been applied. No sample compositing has been applied.
Orientation of
data in relation
to geological
structure
Whether the orientation of sampling achieves unbiased sampling of possible
structures and the extent to which this is known, considering the deposit type.
At this early stage in the drilling programme, it has not been determined if the intervals are true width or
unbiased sampling has occurred. Due to the steep nature and azimuth of some of the drillholes being
reported, the intervals may have incurred a length bias, however the historical geological information
does demonstrate abrupt changes in strike and dip of the mineralisation. Further work is required to
determine if a length bias is present.
If the relationship between the drilling orientation and the orientation of key
mineralised structures is considered to have introduced a sampling bias, this
should be assessed and reported if material.
Drilling dip orientation across the programme is variable from -90 degrees to -55 degrees. Dip and
azimuth for the holes reported are listed in Appendix 1. Historical data indicates a change in dip of
mineralisation from sub vertical to 45 degrees and a length bias may be present in the reported intervals.
Further drilling is required to confirm the orientation of mineralisation.
Sample
security
The measures taken to ensure sample security.
Samples were collected in the
Share your feedback
Discover